The following instuments are basically projected by customers and are designed with custom specifications.
Carburetor Test Stand
The system enables to measure fuel flow to the air flow into a carburetor by changing pre and post pressure of carburetor and fuel supply pressure. The system is configured by the automatic pressure control across the carburetor, fuel flow rate, temperature and automatic pressure measurement.
Fuel Splay Pattern measurement System
The system enables to make a visualization of the fuel spraying by controlling the fuel pressure and the pressure in a test chamber. Several setpoints for the spraying can be changed as required.
Constant Air Flow Generator
The system enables to measure the flow characteristic of an exhaust and intake valve for a cylinder head. The flow test is automatically carried out by generating any desired flow with sonic nozzles.
Canister Load Purge Test Stand
The test stand enables to load a canister with Butane gas balanced with Nitrogen by following with the US evaporative test regulations and weigh the loading capacity for it and purge them with air. A programable operation for the load/purge modes can also be available.
Carbonyl Sampling System
The system enables to sample the Carbonyl group in engine exhaust emissions. The system can be operated automatically from an external equipment.
Point Source Evapolation Test System
The system enables to take sample based on the Point Source Sampling System by following with the US evaporative test regulations.
PM Emission Sampling System
The system enables to take sample gas from a CVS tunnel to a filter paper to trap the soot in exhaust emissions. The system controls the sample flow rate in constant and measure the total cumulative flow.
Muffler Flow Test Stand
The test stand enables to make a flow resistance test of muffler for vehicles.
Pulsation Pressure Applying System
The system enables to apply pulsation pressure instantaneoulsy ? to a muffler in order to make a durability test.
Air Cleaner Test System
The system based on the laminar flowmeter enables to measure pressure drop across air filters for IC engines with varying flow rate automatically and log/analyse results with a PC.
Air Flow Calibration System
The system enables to make a calibration for any air flowmeters by combined with several sonic nozzles.
Pressure Transducer Durability Test Stand
The test stand enables to make a durability test for pressure transducers by applying the pulsation pressure with compressed air or hydraulic system.
Multiple Pressure/Temperature Measurement System
The system enables to measure pressure and temperature simultaneously in multiple points for IC or gas turbine engines.