FAQ | Sokken

Japanese | English

Top >> FAQ

Contact us

Air Flowmeters

[Laminar Flowmeter LFE series] How to choose the 2 types of laminar factors(K20) of [1] and [2] in the certificate?

[Laminar Flowmeter LFE series] What part of the volumetric air flow rate by calculating the equation in the user manual?

[Laminar Flowmeter LFE series] Where is the best position to measure the temperature and pressure to correct the air flow rate?

[Laminar Flowmeter LFE series] What are the minimum/maximum flow range to be able to measure the flow rate accurately?

[Laminar Flowmeter LFE series] How frequently execute an overhaul and flow calibration?

[Direct EGR Flowmeter TEG series] What type of the flow rate is displayed?

[Direct EGR Flowmeter TEG series] Can the TEG-F20 apply to the upstream of EGR cooler?

[Direct EGR Flowmeter TEG series] Is there any restrictions for the directions to install the flowmeter?

[Raw Exhaust Gas Flowmeter VAV-EGF6] Is the output(also display) provided as volumetric flow rate or mass flow rate?

[Raw Exhaust Gas Flowmeter VAV-EGF6] Can the system apply to the high temperature exhaust gas exceed 400C?

[Raw Exhaust Gas Flowmeter VAV-EGF6] How about the durability of silicone membrane in the surge control tube?

Particle Measurement System

[Micro Plasma Aerosol Charger SMAC-4V2] Is the different model provided for large flow rate?

[Micro Plasma Aerosol Charger SMAC-4V2] Can SMAC operate with the different power supply in overseas' countries?

[Exhaust Emissions Particle Number Measurement System PMS-M2 ] Is it possible to take sample from tail pipe with PMS-M2?

[Exhaust Emissions Particle Number Measurement System PMS-M2 ] Is it required to make some additional constructions during the installation?

Gas Analyzers

[Air Fuel Ratio Meter MCS-2] Can the system apply to diesel engine?

[Air Fuel Ratio Meter MCS-2] Can the system apply to the alcoholic fueled engine?

[Air Fuel Ratio Meter MCS-2] How frequently replace a catalyst?

[Portable type air fuel ratio meter PLR-5] Can the model PLR-5 apply to diesel engine measurement?

Smoke Meters

[OBD Smoke Meter SM-501] Are any special attentions for purging SM501 must paid on chassis dynamometer?

[OBD Smoke Meter SM-501] Can SM501 apply to the conditions at dusty dirt rough roads?

[OBD Smoke Meter SM-501] Can SM501 apply to the weather in raining?

[OBD Smoke Meter SM-501] Can SM501 apply to the cold districts?

[Smoke Meter for compliant with JIS/ISO GSM-10EA] Can the different user interface of LAN and RS-232C be used simultaneously?

[Smoke Meter for compliant with JIS/ISO GSM-10EA] How to choose the correct filter paper from the different two types?

[Filter paper type Smoke Meter GSM-3DL] The temperature of the sample handling unit becomes hot due to a heat radiation from an engine by to a short sample line. Should any measures be taken?

[Filter paper type Smoke Meter GSM-3DL] Can the model GSM-3DL take sample gas from pre-DPF?

[Filter paper type Smoke Meter GSM-3] Can a sample line extend to more longer one?

[Filter paper type Smoke Meter GSM-3] What is the maximum cable length between the sample handling unit and control unit?

[Laser scattering smoke meter LEX-635s] Is the length of a sample line specified?

[Laser scattering smoke meter LEX-635s] Can the system allow to take sample the exhaust gas in 500C?

Terms of use(in Japanese) Privacy Policy(in Japanese)

COPYRIGHT Tsukasa Sokken Co.,Ltd. ALL RIGHTS RESERVED.